Deutsch Mark

Frank.N

Hi Remik95,
so the diode seems to be OK.
All 3 diodes on the pcb are 1N4004 diodes.
On the contacts of the lamp directly you measure a voltage?
Sometimes the contacts from the PCB to the socket of the lamp are broken...

Greetings
Frank

Remik95

On The contact i have 0v, i will try with sand paper if its better

Thanks

Remik95

I checked all 3 diod, i have 0,556 on this lonely on left side of PCB, and on right side, on this on the most in left i have 0,021 and just near i have 0,022. I guess the value is different because they are not connected on the same way.

I made some mesure of voltage :

Between the socket of the lamp and before diod, i have 2,15v
Between the socket of the lamp and after diod (or between both socket of the lamp) i have 0v
Between pin (4-5) of the red connector wich are used for the lamp i have 2,16v
Between pin (4-5) of the blue connector on the CPU (Zahlwerk serie) wich are used for the lamp i have 2,16v
Between pin (4-5) of the blue connector on the CPU (Zahlwerk serie) wich are used for the lamp i have 2,16v too, when the counter is not connected

Remik95 · Capture d’écran 2022-12-22 232323.png

And one thing i don't understand, on documentation it's write "Look for connector mashine" but its connector for PCB of door ?

Frank.N

Hi Remik95,
i think this is an error in the manual.
The cable from the counter goes directly to the CPU on the connector "Zählwerk Serie".
The one diode on the PCB ist for the lamp.
The other 2 diodes are for the counter coils, but they must be OK because the machnie counts.
You measure a lower value on this 2 diodes, because there are the coils directly connected with the diodes and you measure both the coils and the diodes...
Look for the connectors on the counter and the CPU if they are corroded...
If the CPU has a problem with LS7 or LZ7, other lamps on machine would not functioning with LS7 and LZ7...
You can see the LS (Lampenspalte = lamp column) and LZ (Lampenzeile = lamp row) written on every PCB in the door directly near the lamps.
If every lamp on the machine with LZ7 or every lamp with LS7 is not functioning there is a problem with the CPU... but i think that is not the case otherwise you have mentioned more lamps be broken.
Greetings
Frank

Remik95

Ok ! Thanks
I'm actually not at home, i will check it when i back

Remik95 · Capture d’écran 2023-01-03 113425.png

Hello !

Happy new Year !

I checked one more time everything, i cleaned the connector with this sand bar for nails, i took new bulb and it's work, i guess it was little corroded

I wait Michel from this second forum about how to deal with paiement and shipping.

I just miss one black thing for hang bulb, but it's look little similar that what can he sometimes in cars.. Maybe i will find something in my garage

discomet

Happy New Year for you too!

Great that it's working. Mabye Michel can also send you the little black thing (bulb holder ?) you are missing.

Remik95 · Capture d’écran 2023-01-03 154054.png

I asked him

I got for the first time "sonderspiele" to 100 and i won until 109,4 DM after the machine automatically paid. I'm happy ahah

I saw new light wich i never saw, under "sonderspiele" with write something 3DM, what is it?

Any idea how to "paint" the glass in back for try to repair the defect, like on pic?

Frank.N

Hi Remi,
i wish you a happy new year too!
The light under the "Sonderspiele" tells you the following:

If you get "Sonderspiele" and you win nothing in the series the machine holds the last 1 "Sonderspiel" until a win of 3DM appear.
I personally would not repair the back glass colour (its an old machine), some other use water colour to repair it:
https://www.geldspielfreunde.de/forum/index.ph…4138#post324138
Be patient if you try to repair it, sometimes you will still see the repair, then you have not the chance to reverse it...

Greetings
Frank

Remik95

You have right, i think it's bad idea try fix the paint.. I can make worse so better do nothing

Oh thanks for translation !

I got it one time but i don't know how. This come like it sometimes or i must align something?

Thanks !

Joschi

Hallo Ihr Bastelkönige!
Es ist sehr interessant Euch bei der Reparatur zu verfolgen so weit die eigenen Englischkenntnisse dazu ausreichen.

Weiterhin viel Erfolg aber bitte das Ergebnis (Grund Ursache ) allen wenn möglich auf deutsch erkären.
Danke und liebe Grüße!

Remik95

Das Problem war ganz einfach, ich habe die Batterie gewechselt und dann einen Reset durchgeführt. Die Batterie war schon neu, hat aber nicht funktioniert, vielleicht eine schlechte Lötstelle. Als nächstes habe ich die gesamte Münzrampe, den Münzmechanismus und den Komparator gereinigt. Dann habe ich die Kontakte der Tachobuchse gereinigt. Danke Google Translate

Joschi

Danke für die schnelle Antwort und weiterhin viel Erfolg mit Deinem Automat.

Frank.N

Hi Remi,
no it only light up if you get a series "Sonderspiele" and you win nothing on the series, then it stops at 1 "Sonderspiele" and the light flashes up to say that it stops on 1 "Sonderspiele" until you get a win of 3 DM.
Thats a normal behavior, so in conclusion the minimum win in a series is 3DM...

Greetings
Frank

Remik95

Oh i understand now!
Thanks !

Remik95 · Capture d’écran 2023-01-05 104108.png

Hello

On the small door where is the lock, it's place for 2 small cart.

I tried find on google pictures of this place for try print something similar, but without success. Any idea of what was here?

Thanks !

Frank.N

Hi Remi,
on one side there was a card from the PTB (technical admission office):
https://de.wikipedia.org/wiki/Spielauto…lger%C3%A4t.jpg

Rows:

1. The PTB numer
2. Name of the machine
3. Adress from the owner of admission (ADP in Espelkamp adress)

4. Timerange of admission

On the other side most of the time there was an business card from the adviser from the machine...
Greetings
Frank

Frank.N

Hi Remi,
i found one picture for a Disc...
Greetings
Frank

Remik95

Thank you Frank for all this !

Jetzt mitmachen!