Deutsch Mark

discomet

When you have the machine you will see how it works. On top of the 5 DM tube there is a silver metal clip. When the tube is full with coins, the clip will mechanically close the tube and the coins will be redirected to the cash box. You may fix or bend the clip a little so that it will always close the tube.

Remik95

Ok ! thanks !
Will check it if one day the post decide bring me the machine ... !

discomet

Welcome! Pleae let us know when it has arrived. Hope everything will be fine and nothing broken. The weight is about 50 kg. Our Deutsche Post here would not transport it (or at least not for acceptable prices). You would need to find another transport company instead.

Remik95

Hello !
I had to go to post center for take it.. anyway, i have it.

Sadly key is not.

So, i tried to power on it, and close the small door in down, its not have more light than previous pics, and light in up near coin hole stay off. I made some pictures, everythings look ok.. But no sound, no more light, disc don't turn.

I took coin inside hole and it's stuck somewhere, i think, because it's go nowhere, no in coin bottle, nowhere..

What can happen...?

Frank.N

Hi Remik95,
on CPU and power supply board the LEDs seemed to be OK...

But if the main door is open the white switch on the left bottom is not active.
This is different from newer machines, there the switch is enabled by the small door not by the main door like at the Disc...
If you want to have the main door open to see whats going on, try to pull out the white switch knob on the left bottom so the switch is on...
Is there any change if you do so?
I think the coin is stuck in the coin comparator.
On the mechanical coin comparator youll find a round sticker with an graphic how to open it for stuck coins...
Try to clean the coin comparator with some Isopropanol alcohol 99% and some cotton buds.

Greetings
Frank

Remik95

Thanks for your answer
I pushed the white switch by hand and its same.
I will try unplug it, maybe switch is dead.

I found sticker yep but i didn't touch because it was in Deutsch and i didnt have translator ahah

Frank.N

Hi Remik95,
sometimes it can be that the machine must be initialized with an connector after battery change.
Do you know if the battery in the white box is changed?
This connector has the Pins 7,14 & 20 briged for initializing and it must be plugged in for some seconds at machine start.
See photo...

This you can see here, its in german but you can see in the video how the machine must be initialized from 0:00 to 2:30 Min.
Greetings
Frank

Frank.N

Hi Remik95,
oh sorry here the video:
https://www.youtube.com/watch?v=XQ6fwPGnHnM
Greetings
Frank

Remik95

I totally don't know if battery was changed, previous owner said nothing.
I found how to build the tool for reset it with old IDE cable.
I tested with multimetr the button of door, in left down, it's look like it's working like it should..
Near this button, it's something for count, like kilometer on car, do you know for what is it?
Thanks!

Frank.N

Hi Remik95,
this is the counter for total games the machine made in his life...
Greetings
Frank

Remik95

Thanks!
With possibility to reset it?
Because its zero

Frank.N

Hi Remik95,
yes it seems to, there is a button under the counts for resetting it...
Sometimes this counter was also used for counting the games between services for the service technician.
On starting the machine do you hear some beeps like in the video?
Have you found the speaker on the top right behind the cointower? There is a volume knob...

It is possible that some components on the CPU (white box) are dead so the lamps are not glowing and discs are not starting...
Greetings
Frank

Remik95

Zero bip, nothing.
Just few lights switch on and nothing more..

I saw speaker, but i didn't know it's possible set the sound.

Oh no i hope cpu don't have problems.. My electronic skills are not enough good to fix it and I'm sure it'd hard for find it..

Frank.N

Hi Remik95,
first of all power off the machine and try to measure the battery with a multimeter on the CPU.
The battery is under the white hood, you can see the battery if you open the CPU door...

If it is under 3 Volts then you have to change it first with a new 3,6 Volts battery, then you have to initialize... i think this is the first step then we will see if it works...

Battery: https://www.reichelt.com/pl/pl/bateria-…tct=pol_4&nbc=1
Greetings
Frank

Remik95

Thanks Franck for your help

Even if light for battery is off, the battery can be dead?

I bought new battery when i waited for the automat, i will check it too:)

Frank.N

Hi Remik,
normally not, but if there ist something wrong with the LED or the ICA2 on the CPU it can be an indication error...
Greetings

Frank

Remik95

Battery have 3,67v
I tried reset cpu but it's look like my tool don't work.. Or nothing happen..

Remik95

I took this thing for reinitialisation correctly, nothing happen

Speaker volume is on center

Remik95

I made film of what happen when i power on the machine.

https://youtu.be/btVioChdanM

This "9 0. 1" mean something?

When i put coin inside, it's still not work, coin fall directly when they are not blocked, nothing go inside tube.

Frank.N

Hi Remik95,
no the 9 0.1 ist only random at start.
After that you see the a display with 0.00 an then the discs are correcting their position so the CPU is working but it seems that the CPU is waiting on the discs...
Try to check the cables from CPU to the discs if there is something wrong with it...
With machine power off you can beep the cables with your multimeter.

The other thing you can try is to desolder the battery on one side and solder it on again.
After that try to initialize the machine with your connector.
Sometimes the CPU stuck of RAM errors, if you desolder the battery on one side the RAM should be erased and you can start at beginning with initialization.
Greetings
Frank

Jetzt mitmachen!