Beiträge von Remik95

Hello again,

I tested and cleaned one more time the coin comparator.
I tested it with few more coins, i had to set the screw A for all 1 mark fit perfectly ( discomet, i started wrote this message before your answer, but thanks for the advice! I tried with euros and doesnt work).
On table, it's perfect.
Only one thing, for 10 pfennig, they are often returned because in back, one plate is not pushed on the comparator. I didnt find how to solve it.

I took on the machine and all coins are returned.

I saw its one thing on the machine, i don't know what, i show it on pic with scredriwer. If i let it push with screwdriver inside hole, it's work.
But.. sometimes i have alarm, so i guess this is for alarm?
Without screwdriver in hole, i have trouble..

Hello !

So the machine is on the wall and work, but not perfectly.

When i take 10 pfennig, coin is returned in 99% of time
1 mark, 80% of time is returned
2 mark, 50% of time is returned
5 mark, 50% of time returned

When coin is not returned, half of the time it's stay stuck inside coin comparator.

I draw on pic where coins stay stuck..

I cleaned all with alcohol 2-3 times.
Coins was clean with ultrasonic.
Same coin can work one time and second time don't work.
Any idea?

On table, comparator work fine with 0,10dm 1dm 2dm
On table the first comparator for 5dm work fine too..

Thanks

Yep, i took it off, its look like it's working good. But it's dirty. I will clean it.
I bought glue for plastic, i will try

Ok ! It's smell WD40, maybe that is the reason why it's trouble too..
Thanks, i will try glue the ramp and let you know !

Hi,
Thanks, i wrote him message just now. I asked him too if maybe he can print the coin ramp.

Ok, i will clean the mechanism, thanks for the advice and how to take it of

Anotther ask, what gind of oil / grease can i use for coin separator ?

The ramp for the coins is broke in down and a lot of coins are "lost" on the righ of mecanism.

When i take manually coin directly to the mechanism (in end of slide), it's work, but not with all coins. For example 10 pfennig fall directly on coins return, but with 5 DM it's work.

Hi again Frank.

First, i want to say you THANK YOU VERY MUCH for your help (in addition, in english !). If you come to Cracow one day, come drink a coffee and lost some DM in the automat at home

Second, i wanted say that it's work ! I took of battery, i weld new rack for battery amd i took new battery and my little tool for reset and "bip bip" !

I took some coins inside, with think it will not work and... "bip bip bip tut tut tut" it's work !


I made some film, i think all is ok..? :

I have few more questions.. If you have time.. ?

- The lock is broke, previous owner drilled it for can open. I found on ebay.de used one for 59,90 euros + 12,90 euros shipping. It's really a lot for me, is it any chance to build or adapt something else time i find an other, but cheaper ?
- How the game is working... ? I translated the user guide in French but i don't understand everything..... Nothing for be honest.. And i never played with machine like it in past, only with slots machine in casino one time..

Thanks !

Hello Frank.N,

Your message make me feel better, i was affraid that CPU is gone


I will check cables between CPU and discs.


I will try do to what you tell me with the battery, and i will install rack for battery like many person do, i think it's better.


Next etap after it, will be to find what happen with coins ramp. Coins stuck in mechanism, but mechanism is full of WD40, it's smell.

I made film of what happen when i power on the machine.

https://youtu.be/btVioChdanM

This "9 0. 1" mean something?

When i put coin inside, it's still not work, coin fall directly when they are not blocked, nothing go inside tube.

I took this thing for reinitialisation correctly, nothing happen

Speaker volume is on center

Battery have 3,67v
I tried reset cpu but it's look like my tool don't work.. Or nothing happen..

Thanks Franck for your help

Even if light for battery is off, the battery can be dead?

I bought new battery when i waited for the automat, i will check it too:)

Zero bip, nothing.
Just few lights switch on and nothing more..

I saw speaker, but i didn't know it's possible set the sound.

Oh no i hope cpu don't have problems.. My electronic skills are not enough good to fix it and I'm sure it'd hard for find it..

Thanks!
With possibility to reset it?
Because its zero

I totally don't know if battery was changed, previous owner said nothing.
I found how to build the tool for reset it with old IDE cable.
I tested with multimetr the button of door, in left down, it's look like it's working like it should..
Near this button, it's something for count, like kilometer on car, do you know for what is it?
Thanks!

Thanks for your answer
I pushed the white switch by hand and its same.
I will try unplug it, maybe switch is dead.

I found sticker yep but i didn't touch because it was in Deutsch and i didnt have translator ahah

Hello !
I had to go to post center for take it.. anyway, i have it.

Sadly key is not.

So, i tried to power on it, and close the small door in down, its not have more light than previous pics, and light in up near coin hole stay off. I made some pictures, everythings look ok.. But no sound, no more light, disc don't turn.

I took coin inside hole and it's stuck somewhere, i think, because it's go nowhere, no in coin bottle, nowhere..

What can happen...?

Ok ! thanks !
Will check it if one day the post decide bring me the machine ... !

Great, i learn new things every days

Do you have link / picture of the modification or the deutsh words for i search ?

So i understand the machine check the coins you give (this was loical for me), but not what you win..

If i understand good :
You drop 5 DM inside
You have 5 DM credit
The coin go in the orange box
You win for example 10 DM
You aks the machine for pay you (i guess it's a specific button?)
The machine give you 10 DM from tubes

So inside tube i can even take PLN, EURO, washers..